Thermal Tapes
As each new generation of electronics equipment exhibits higher performance and more and more power into ever smaller packages, it will dissipate power in the form of heat and requires some degree of thermal management.
Thermosol markets a variety of Thermal Management Materials in response to the changing needs of the assembly of electronics packaging in notebook computers, high performance CPU, chipsets, mobile electronic appliances, power conversion and amplification modules etc. Our products include thermally conductive Pads / Insulators and gap fillers, thermally conductive adhesive tapes, phase change interface materials, graphite foil.
The FCT-730 series of thermal conductive adhesive tape has varying thicknesses (from 0.05mm to 0.5mm) and can be used to seal gaps among PCBs, heat dissipating modules, metallic structures, and machine casings. When the product is applied, heat is conducted away from sensitive components while uneven surfaces are properly flattened and filled. The adhesive is also electrically isolating. The FCT-730L series has UL 94 V-0 Flammability rating. Can be supplied cut to customers size. Available in rolls.
Part Number |
||||||
Specification |
FCT73S-05/10 |
FCT73L-15 |
FCTL73-25 |
FCT73L-40 |
FCT73L-50 |
Method |
Adhesive Thickness (mm) |
0.05 / 0.10±10% |
0.15±10% |
0.25±10% |
0.40±10% |
0.50±10% |
- |
Thermal Conductivity (W/m.K) |
0.85 |
1.0 |
ASTM D5470 |
|||
Thermal Impedance (°Cin2/W) |
0.414 |
0.558 |
0.659 |
0.884 |
1.541 |
ASTM D2240 |
Adhesive Type |
Acrylic Polymer |
- |
||||
Flammability Rating |
- |
- |
94V-0 |
94 V-0 |
94 V-0 |
UL |
Carrier Type |
N/A |
Fiberglass |
Fiberglass |
Fiberglass |
Fiberglass |
- |
TACK |
8 /12 |
10 |
10 |
15 |
15 |
J. Dow |
Adhesion N/25mm |
>10.78/>13.72 |
>8.86 |
>10.76 |
>13.68 |
>13.68 |
PSTC-101 |
Holding Power (Hr) |
>48 |
PSTC-7 |
||||
Insulation Strength (KV) |
1/2 |
2 |
5 |
8 |
9 |
ASTM D149 |
Temperature Range °C |
-20~+120 |
- |
||||
Standard Sheet Size (mm) |
300x300 |
- |
||||
Standard Roll Size (M) |
1.24(W)x25/50/100(L), 1.05(W)x25/50/100(L) |
- |
||||
Colour |
White |
- |
||||
The MCT series has a high thermal conductivity of 1.40 W/mK with thickness 0.25mm and yet a low thermal resistance of 0.52K/W. It also has very good electrical insulation characteristics. No need for clips or screws due to excellent permanent adhesive strength.
Series
|
Thermal Cond.
W/mK |
Hardness
|
Tensile Strength
(MPa) |
Temperature Range
|
Adhesive Type
|
Colour
|
Data
|
Notes
|
MCT-90-KL |
1.40 |
45 Shore A |
0.25 |
-40 ~ +125 |
Acrylate |
Black |
 |
With or without glass reinforcement. |
